Pixel Archives - AddROM Bypass FRP

How To Change Your Lock Screen Shortcuts On Android 12 On A Pixel

Jazz — Tue, 05 Mar 2024 12:33:11 +0000

How To Change Your Lock Screen Shortcuts On Android 12 On A Pixel

(Android 12 On A Pixel)Android 12 is bringing a lot of enhancements to the best Android phones, and one that is a little overlooked is the ability to adjust smart home tech from your lock screen. From dimming lights to adjusting your thermostat, your lock screen offers quick shortcuts that allow you to take control without having to launch an app first. We’ll show you where those are and how to configure them to your liking.

How to change your lock screen shortcuts on Android 12

First, go to your lock screen. The easiest way to do that is to press the power button on your phone to turn the screen off, then press it again to turn the screen back on. From there, follow these steps.

1. Tap the button in the bottom left corner that looks like a little house.

2. That will bring up your home controls. Tap the three dots in the upper right corner.

3. Tap Add controls or Edit controls. We’ll deal with editing controls first.

4. When you tap edit, put in your PIN (or scan your fingerprint) to unlock the phone.

5. Next, you’ll see all the controls you currently have set up. You can remove the checkmark to remove the command, and you can tap and hold to drag the controls around to the order you want them.

6. When you’re done, tap Save.

How to add smart home controls to your lock screen

Next, we’ll talk about adding controls.

1. Tap the button on your lock screen that looks like a house, as described above.

2. Tap the three dots in the upper right corner.

3. Tap Add controls.

4. Enter your PIN or scan your fingerprint.

5. Here, you’ll see a list of available controls. Tap the checkboxes to add or remove checkmarks as you like.

6. At the bottom of the list, tap see other apps.

7. This gives you the choice of Home or Cat controls. Tap Cat controls.

8. Here, you can add a Water bubbler, Food bowl, or Toy if you want to.

9. When you’re done, tap Save.

Once you’re done setting that up, the controls will be available from your lock screen by tapping the house on your lock screen.

A word about the cat controls

You may recall that the Easter egg in Android 11 involved luring cats into your notifications and collecting them. The presence of cat controls in the Android 12 home control menu indicates that tradition may continue. As of this writing, despite maintaining a full bowl and water bubbler for a few days, we have not seen a cat yet. These controls may be removed from the final release of Android. Either way, we’ll be sure to update this article once we know more.

Also Visit addROM.org

The post How To Change Your Lock Screen Shortcuts On Android 12 On A Pixel appeared first on AddROM Bypass FRP.

How To Install Android 13 Developer Preview On Your Pixel

Alex — Sun, 25 Feb 2024 15:54:08 +0000

How To Install Android 13 Developer Preview On Your Pixel

(How To Install Android 13) It’s been barely a month since the first Android 13 Developer Preview dropped, but Google is already fixing problems and showing of new features in the new Android 13 Developer Preview 2 release. Getting your hands on a copy is not as simple as tapping the download button, since developer previews are made with a specific audience in mind (hint: developers). If you’re the type who prefers to have a phone that just works, you’ll probably want to wait for the upcoming beta version. But, if you’re willing to take the risk—and not get upset if and when things go wrong—here’s how you can install Android 13 on your Google Pixel.

You should be willing and able to provide quality feedback to Google if you run into any issues, with detailed steps to reproduce any problems, paired with system logs. You should also have the skills to troubleshoot general Android problems ranging from simple app crashes or deleted app data to fixing a soft brick — or have the will to work through those issues on your own when you run into problems. If you’re worried you won’t be able to fix issues you may encounter on a developer preview, hold off for now.

Details:

The Android for Developers website has been updated with a whole host of Android 13-related details, and among them are a pair of download pages for full factory images and sideloadable OTA files. In a few months, installing Android 13 will be simple: You’ll just need to register for the Android Beta Program. But right now, you’ll need to manually install the files on your Pixel to try out Android 13.

Unlocking your bootloader and install flashing the full factory image is one way to get Android 13 on your phone, but it’s not one that we recommend. Not only is it a pain, but it also wipes your phone and can break SafetyNet attestation. Sideloading the OTA file for your Pixel is a better choice, since it doesn’t require an unlocked bootloader, and you don’t have to wipe your phone. However, you still need to do a bit of prep work if you aren’t set up for it.

Google’s stock OTA images site walks you through the process, and the same details apply to Android previews. If you’re unfamiliar with the process, consider reviewing a detailed walkthrough for your computer platform before you get started. Installing the required software and drivers is an easier process on some operating systems than it is on others.

Prerequisites:

A computer running Linux, macOS, or Windows. The truly adventurous can also use another Android phone with USB OTG functionality.
A supported device for the Android 13 Developer Preview. Right now that list is limited to the Pixel 4 series, Pixel 4a series, Pixel 5, Pixel 5a, and Pixel 6 series.
A good cable to connect your computer (or phone with USB OTG) to your phone.
A supported web browser, such as Google Chrome or Microsoft Edge. The Android Flash Tool relies on WebUSB to connect your computer to your phone, so it won’t work without this feature.

Install Android 13 with the Android Flash Tool

Google has made DP 2 available through the Android Flash Tool, which makes the process fairly simple since you won’t need any tools for the installation. The tool has built-in steps and tips to guide you through the process. To install the latest Android 13 preview or beta using the Android Flash Tool,

Follow these steps:

(1). Plug your Google Pixel into a USB port on your computer.

(2). Visit the official Android Flash Tool website on your computer and click the Get Started button.

(3). Tap Download Android USB Driver and follow the instructions if needed; otherwise, press Already installed to continue.

(4). Click the Allow ADB access button so your computer and phone can share information bi-directionally.

(5). On your Pixel phone, confirm the fingerprint key for the computer by pressing Allow when required.

(6). If you get the No devices available message on the Flash Tool, follow the on-screen steps to prepare your device for the installation process.

(7). Press the Add new device button after your device has been set up correctly.

(8). Select your Pixel in the menu popup, then press the Connect button.

Popular builds

Once your Pixel phone is connected to your computer, you can search for the specific build you want to install in the Android Flash Tool. In this case, you should find the Android 13 preview under the Popular builds section.

Click the latest version, then it’ll take you to the overview screen for that build. By default, installing a preview build will factory reset your device, relock the bootloader, and replace all of your previous system files with the new ones.

This is fine for most users, but you can also change these settings by pressing the pencil icon on the right. Hovering over the question mark for each option explains what it does, so you can disable or enable any of them as needed.

Once you’ve made your selections and are ready to install the Android 13 preview, simply press the Install build button to begin the process. It’ll take some time to complete, so be patient while it works its magic. Once the installation is finished, your phone should automatically reboot and bring you to the Pixel welcome screen. Once you go through the initial setup you’ll be ready to test the shiny new preview build for Android 13.

We recommend the Android Flash Tool for most users because it’s straightforward and requires little effort. If you’d rather install the update manually, follow the steps below.

How to manually install an Android 13 preview or beta

(1). Install the Android SDK platform tools (i.e., ADB) and USB drivers (if you’re using Windows).

(2). Download the Developer Preview OTA image for your device.

(3). Connect your phone to your computer.

(4). Reboot into recovery (via ADB/USB debugging or the key combination) and enter sideloading mode. Power+volume up opens the Recovery menu, scroll via the volume keys to “apply update from ADB,” and select it with a tap of the power button.

Check that prior steps worked by entering “ADB devices” (no quotes) in a shell or command prompt. If ADB is installed and your phone is in the correct mode, you should see an identifier for your phone and a “sideload” state reported.

(5). Flash the OTA via a shell or command prompt, using “ADB sideload your_file_name_here.zip” with no quotes, where the filename is the name of the OTA image you downloaded earlier. On some platforms, you’ll need to precede ADB commands with “./” for them to work correctly.

(6). Stare anxiously at your phone while it slowly installs.

(7). Reboot when done.

Tips:

After you type the “ADB sideload” part without the quotes and hit the space bar, you can drag and drop the OTA file onto the command window. Doing so will automatically generate the correct file name for you. This allows you to quickly install the OTA onto your device without typing out more than you have to.

Once you have the preview installed, future Android 13 updates and releases will be delivered like any other normal system update, without requiring you to hit all these steps again, and your phone will automatically end up in the beta track later. If you’re not loving the Developer Preview life, reverting to Android 12 is relatively simple.

The post How To Install Android 13 Developer Preview On Your Pixel appeared first on AddROM Bypass FRP.

How To Put In Android 12 Beta On Your Pixel 3 Or More Recent

Jazz — Thu, 22 Feb 2024 12:56:49 +0000

How To Put In Android 12 Beta On Your Pixel 3 Or More Recent

(Pixel 3 Or More Recent)Soon after going by way of the early developer preview phase, the fourth Android 12 beta is below. Whilst the preceding developer builds ended up very early builds, the new Android 12 beta introduces steadiness advancements to the OS and needs to be virtually ready for release. Google says its most important target is to make Android 12 “more intuitive, improved carrying out, and much more protected.” You can discover more about the new Android beta in our report right here.

As you’d expect with a beta, this newest launch is aimed primarily at builders. Although further more together than our past glance, we warn towards attempting it out except you have a secondary device lying all around, as it may be way too buggy to use as a day-by-day driver. For those people with a spare Pixel or who want to toss a warning to the wind, you can download and implement the update manually or by using OTA. That explained, the encouraged method is an over-the-air update which you can sign up for below.

Although working with a manufacturing facility impression is generally the default method, we hugely propose skipping the factory photographs in favor of OTA images. You will however have to set up it manually, but utilizing an OTA graphic does not need you to fully wipe your system. Of system, if you are a developer and want the cleanest method, manufacturing unit illustrations or photos could be greater.

Choose whether you want to sideload or the OTA? Retain reading through.

Here’s what you require to get started out

A suitable Pixel 3 or later on the machine and a USB cable to join it to your computer
- Compatible Pixel telephones contain the Pixel 3, Pixel 3 XL, Pixel 3a, Pixel 3a XL, Pixel 4, Pixel 4 XL, Pixel 4a, Pixel 4a 5G, and Pixel 5
The Android SDK mounted on your machine with ADB and Fastboot command productively functioning — verify the tutorial listed here

Now for the real ways.

Obtain the good documents to put in the Android 12 beta

You ought to download the correct file for your gadget in advance of you get started. We recommend making use of OTA visuals around manufacturing facility photos, as the approach is easier to do and allows you to continue to keep previous files if that’s anything you’re interested in.

Click here to grab the OTA impression for your particular Pixel product. It is also doable to use the entire manufacturing unit photographs (listed here), which necessitates excess hoops like unlocking your bootloader and additional. If you want to keep points uncomplicated, we advocate sideloading the OTA. We made our directions underneath for this put-in sort.

Get ready for your cellular phone

When you have put in the file, you need to reboot your telephone into Restoration Mode to apply the OTA. Then, you’ll be ready to put in the Android 12 beta.

Initially, shut off your mobile phone.
Upcoming, hold down Electrical power and Quantity Down buttons at the very same time.
The bootloader menu will now display. Use quantity buttons to scroll down to Recovery Manner.
Select Restoration Manner by clicking the electricity button.
You will be offered an Android robotic with an exclamation mark on it. Now you will press the electric power button and volume up button for about a second.
Release the volume up button will send you completely into recovery.
Upcoming, use the quantity buttons and scroll down to Use update from ADB. Force the electricity button to decide on the alternative.
And finally, you are going to see a blank display screen telling you how to sideload an OTA.

Prepare your Computer system to put in the Android 12 beta:

Now that your cellular phone is completely ready, it is time to make the magic transpire.

Connect your handset to your Personal computer using USB cable. Bear in mind, your computer requirements to have ADB equipment put in.
On Home Windows, enter Command Prompt. On Linux or Mac, you will want to use Terminal. For Home Windows people, make guaranteed you navigate anywhere you are storing the folder.
Future, you must enter adb sideload for Windows or ./adb sideload for Mac/Linux.
Now you are going to want to enter the name of the .zip folder from just before and hit enter.
At the time done, your mobile phone will return to Restoration Method, and you can remove the USB cable.
Go to Reboot Now with the quantity keys and press the electrical power button.

That is it. If everything went alright, you were equipped to install the Android 12 beta productively.

The post How To Put In Android 12 Beta On Your Pixel 3 Or More Recent appeared first on AddROM Bypass FRP.