TOOL + ROM Stock OPPO A11 – Unbrick Qualcomm 9008 9006



The OPPO A11 is a remarkable device known for its sleek design and advanced features. However, like any electronic device, it may encounter issues that could lead to the infamous Qualcomm 9008/9006 error, rendering the phone unresponsive. In this comprehensive guide, we’ll walk you through the steps to unbrick your OPPO A11 using Qualcomm 9008/9006, ensuring your device is back up and running smoothly.

Understanding the Qualcomm 9008/9006 Error:

  1. What is Qualcomm 9008/9006? The Qualcomm 9008/9006 error is a technical glitch that can occur during the firmware flashing process. It leaves your OPPO A11 in a state where it’s recognized as Qualcomm HS-USB QDLoader 9008 or 9006 by your computer, but the device remains unresponsive.
  2. Common Causes of the Error:
    • Interruption during firmware update
    • Incorrect flashing procedure
    • Incompatible firmware version
    • Software conflicts

Unbricking OPPO A11 Step-by-Step:

  1. Install Qualcomm USB Drivers: Before attempting any unbricking, ensure that you have the necessary Qualcomm USB drivers installed on your computer. These drivers facilitate communication between your PC and the OPPO A11.
  2. Download Appropriate Firmware: Visit the official OPPO website or a reliable source to download the correct firmware for your OPPO A11 model. Make sure it’s compatible and up-to-date to avoid any further complications.
  3. Use EDL Mode:
    • Put your OPPO A11 into Emergency Download (EDL) mode by turning off the device and connecting it to your PC using a USB cable.
    • Open the device manager on your computer, locate the Qualcomm 9008/9006 port, and install the necessary drivers if prompted.
  4. Utilize QFIL (Qualcomm Flash Image Loader):
    • Download and install the QFIL tool on your computer.
    • Launch the QFIL tool and load the firmware file you downloaded earlier.
    • Connect your OPPO A11 in EDL mode to your PC.
    • Click on “Download” to start the flashing process. This will overwrite the corrupted firmware.
  5. Wait for Completion:
    • Be patient as the QFIL tool flashes the firmware onto your OPPO A 11. Do not disconnect the device during this process to avoid any interruptions.
  6. Reboot Your Device:
    • Once the flashing process is complete, disconnect your OPPO A 11 and reboot it. Your device should now be unbricked and ready for use.

Preventing Future Bricking:

  1. Follow Official Instructions: Always follow the official firmware flashing instructions provided by OPPO to avoid any compatibility issues or errors.
  2. Backup Before Flashing: Prior to any firmware updates, ensure you have a complete backup of your OPPO A 11. This safeguards your data in case of unexpected issues during the flashing process.


Unbricking your OPPO A11 from the Qualcomm 9008/9006 error is a straightforward process when you follow the correct steps. By installing the necessary drivers, downloading the appropriate firmware, and using tools like QFIL, you can revive your device and continue enjoying its features. Remember to exercise caution during firmware updates and always refer to official sources for guidance to prevent potential bricking issues in the future. Your OPPO A 11 is now ready to shine again!

DOWNLOAD: (Link goolge drive)


Leave a reply

Your email address will not be published. Required fields are marked *

You may also like