ROM Sony Z3 Tablet Compact WiFi (SGP611/SGP612)

(Sony Z3 Tablet Compact WiFi)In the realm of portable devices, the ROM Sony Z3 Tablet Compact WiFi (SGP611/SGP612) stands out as a versatile and powerful gadget that caters to the needs of both casual users and tech enthusiasts alike. With its sleek design, impressive performance, and an array of features, this tablet offers a seamless experience for users seeking convenience, entertainment, and productivity on the go.

ROM Sony Z3 Tablet Compact WiFi (SGP611/SGP612)

DOWNLOAD:

SGP612

SGP611

Flashing instructions:

(1). Download and install the Sony Xperia USB Driver on the computer. If in case Xperia Drivers are already installed, then SKIP this step.

(2). Download and extract Sony Xperia Firmware on the computer. After extracting the firmware, you will be able to get similar files (with .ftf extension):

(3). Download and install the Sony Xperia Flash Tool on the computer. If the Xperia Flash Tool is already installed, then SKIP this step.

(4). Once the Sony Xperia Flash Tool is installed, Launch it from the Desktop Shortcut or the Start Menu. Alternatively, you can also launch the Flash Tool from the C:\Flashtool\ folder.

(5). Once Sony Xperia Flashtool is launched, you will be able to see the following screen.

(6). Click on the Flash Button.

(7). Now, you will be able to see the Bootmode Choose Dialog Box. Select the Flashmode option and Click on the OK button.

(8). Load the downloaded Xperia Firmware (.ftf) in the flash tool by clicking on the Browse Button.

Locate and Select the Firmware Folder:

(9). Once the Firmware is Loaded in the Flash Tool, Select the Firmware version using the dropdown button.

Select all the Checkbox under the Wipe area and Click on the Flash button to begin the flashing process:

(10)Power off the Xperia Device > Press and Hold the Volume Down button and connect the device to the computer using the USB cable.

(11). Once the device is successfully connected to the computer, flashing will begin and will take 5-10 minutes to complete.

(12). Once the flashing process is completed, disconnect your device from the computer and turn it On.

Leave a reply

Your email address will not be published. Required fields are marked *

You may also like