STOCK ROM (UNBRICK) FOR ASUS ZENFONE 4 MAX PRO (X00ID) (ZC554KL)
Introduction:
If you own an ASUS ZenFone 4 Max Pro (X00ID) and find yourself in a situation where your device is bricked or malfunctioning, don’t worry – there’s a solution. In this guide, we’ll explore the process of unbricking your smartphone using the Stock ROM, ensuring a smooth and hassle-free recovery.
Understanding the Importance of Stock ROM:
Stock ROM, or Stock Firmware, is the official operating system that comes pre-installed on your device. It’s essential for the proper functioning of your smartphone and serves as a foundation for the user interface, system apps, and overall performance. When your ASUS ZenFone 4 Max Pro encounters issues or becomes unresponsive, reinstalling the Stock ROM can be the key to resolving these problems.
Why Unbrick with Stock ROM? Unbricking your ASUS ZenFone 4 Max Pro using Stock ROM is crucial for several reasons:
- Restore Device to Factory State: Stock ROM brings your device back to its original factory state, eliminating any custom modifications or alterations that might have caused the issue.
- Fix Boot Loop Issues: If your device is stuck in a boot loop, continuously restarting without fully powering up, Stock ROM can rectify this problem and bring stability to your smartphone.
- Resolve Software Glitches: Stock ROM installation helps in resolving software glitches and errors that may have caused your device to become unresponsive or malfunction.
Step-by-Step Guide to Unbrick ASUS ZenFone 4 Max Pro:
1. Preparing Your Device: Before starting the unbricking process, ensure that your ASUS ZenFone 4 Max Pro has sufficient battery life to complete the installation. Backup your important data, as the process may result in data loss.
2. Download Stock ROM: Visit the official ASUS support website and locate the Stock ROM for ASUS ZenFone 4 Max Pro (X00ID). Download the firmware file to your computer.
3. Extract the Firmware: Use a file extraction tool to extract the downloaded firmware. You should obtain a file with a “.zip” extension.
4. Install Necessary Drivers: Ensure that the required USB drivers for your ASUS ZenFone 4 Max Pro are installed on your computer. This ensures a smooth connection between your device and the computer during the installation process.
5. Install Flashing Tool: Download and install the appropriate flashing tool on your computer. Popular tools include SP Flash Tool or ASUS Flash Tool, depending on your device model.
6. Connect Your Device: Power off your ASUS ZenFone 4 Max Pro and connect it to your computer using a USB cable. Launch the flashing tool and follow the on-screen instructions to establish a connection.
7. Flash the Stock ROM: Load the extracted Stock ROM firmware into the flashing tool and initiate the flashing process. This may take some time, so be patient and do not interrupt the process.
8. Completion and Reboot: Once the flashing process is complete, disconnect your ASUS ZenFone 4 Max Pro from the computer. Power it on, and you should see the device booting up with the official Stock ROM.
Conclusion:
Unbricking your ASUS ZenFone 4 Max Pro using Stock ROM is a straightforward process that can breathe new life into your device. By following the step-by-step guide outlined above, you can successfully recover your smartphone from a bricked state and enjoy its optimal performance once again. Always remember to use official firmware and follow the instructions carefully for a seamless unbricking experience.
DOWNLOAD:
- Flash via Fastboot mode:
- UL-ASUS_X00ID-WW-15.2016.1905.514-user.zip | AFH | OneDrive | DropBox
- UL-ASUS_X00ID-WW-15.2016.1903.512-user.zip | AFH | OneDrive | DropBox
- UL-ASUS_X00ID-WW-15.2016.1902.507-user.zip | AFH | OneDrive | DropBox
- _UL-ASUS_X00ID-WW-15.2016.1812.505-user.zip | AFH | OneDrive | DropBox
- UL-ASUS_X00ID-WW-15.2016.1809.412-user.zip | AFH | OneDrive | DropBox
- UL-ASUS_X00ID-VF_TR-14.2016.1805.235-user.zip | AFH | OneDrive | DropBox
- UL-ASUS_X00ID-VF_TR-14.2016.1803.233-user.zip | AFH | OneDrive | DropBox
- UL-ASUS_X00ID-TIM-15.2016.1809.412-user.zip | AFH | OneDrive | DropBox
- UL-ASUS_X00ID-TIM-14.2016.1805.235-user.zip | AFH | OneDrive | DropBox
- UL-ASUS_X00ID-TIM-14.2016.1711.212-user.zip | AFH | OneDrive | DropBox
- UL-ASUS_X00ID-BICCMA-14.2016.1802.230-user.zip | AFH | OneDrive | DropBox
- UL-ASUS_X00ID-BICCAM-15.2016.1907.519-user.zip | AFH | OneDrive | DropBox
- UL-ASUS_X00ID-BICCAM-14.2016.1807.237-user.zip | AFH | OneDrive | DropBox
- UL-ASUS_X00ID-BICCAM-14.2016.1805.235-user.zip | AFH | OneDrive | DropBox
- UL-ASUS_X00ID-BICCAM-14.2016.1803.233-user.zip | AFH | OneDrive | DropBox
- Flash via Edl mode:
HOW TO FLASH:
ROM 1:
If your phone is suspended logo or software error, but can go into fastboot mode then use (WW_ZC554KL-14.2016.1711.215-20171115.zip). Reboot device to Fastboot mode (press Vol Up + Power), then download and extra firmware. Final, run flashall_AFT.bat in the folder. Waiting and done 😀
ROM 2:
If your phone is bricked, you can use this firmware (QL1516_Userdebug_S121_1706031330_factory.rar). Reboot device to Edl mode (press Vol Up + Down and connect to PC), flash with QFIL tool or DownloadTool